|
External Flagpole Hardware Quick Menu: |
Gold Balls Eagles Halyard (Rope) External Stationary Trucks External Revolving Trucks Snap hooks cleats Truck Adapters Flash Collars Cleat Cover with Halyard Channel American Flags |
|
Internal Flagpole Hardware Quick menu: |
Gold Balls Eagles Internal Stationary Trucks Internal Revolving Trucks Snap hooks retainer ring assembly cable assembly winch/handle flash collars counterweight flag arrangements American Flags |
 |
External Halyard Flag Pole Trucks Revolving with spindle
|
|
Cast aluminum construction with a cast nylon sheave on a 1/4" aluminum axle. The flagpole truck body rotates on 26 stainless steel ball bearings on cast races. This single sheave flag pole truck can be used on poles with up to 4" O.D. tops. The top of the spindle is tapped 1/2" as standard to accept a gold ball or eagle. Maximum recommended halyard (rope) diameter is 5/16"
| Selecting the correct thread size for a spindle based revolving truck | |
| National Pipe Thread Size | Approximate Measurement at the spindle base |
| 1" NPT | 1 1/4" |
| 1 1/4" NPT | 1 5/8" |
| Spindle Thread Size | Item # | Price |
| 1 1/4" NPT | TRK-9600
(will not work w/ TRK2050 adapter) |
|
| 1" NPT | TRK-9400
(will not work w/ TRK2050 adapter) |
HEAVY DUTY EXTERNAL HALYARD FLAGPOLE TRUCKS
| Item No. TRK9430 |
Extra Large Single Sheave External Revolving Truck |
|
 |
Constructed from heavy cast aluminum with additional reinforcement in all critical areas. This truck assembly can be used on flagpoles with up to a 7 1/2" top diameter. For additional strength, product life and ease of rotation, these trucks utilize upper and lower stainless steel, sealed lubricant bearing assemblies on a cast aluminum spindle. The spindle is threaded 1 1/4" NPT and is tapped 1/2" for finial. | |
| Item No. TRK9750 |
Extra Large Double Sheave External Revolving Truck |
|
 |
Heavy cast aluminum construction, the truck body rotates on upper and lower stainless steel sealed lubricant bearing assemblies for longer life and greater ease of rotations. This EXTRA LARGE Truck assembly can be used on flagpoles with up to 9" top diameter shafts. The standard cast aluminum spindle is threaded 1 1/4" NPT with the top of the truck tapped 1/2" for finial. |
|
|
External Halyard Flag Pole Trucks Revolving with cap |
|
Cast aluminum construction with a cast nylon sheave on a 1/4" aluminum axle. The flagpole truck body rotates on 26 stainless steel ball bearings on cast races. This single sheave truck can be used on poles with up to 4" O.D. tops. The top of the truck assembly is tapped 1/2" as standard to accept a gold ball or eagle. Maximum recommended halyard (rope) diameter is 5/16" |
| Shaft top diameter | Item # | Price | |
 |
1 7/8" - 2" | TRK-9350 | |
|
2 3/8" - 2 1/2" | TRK-9365 | |
|
2 7/8" - 3" | TRK-9370 | |
|
3 1/2" | TRK-4000 | |
|
4" | TRK-4050 |
1-888-317-4594 Fax: 1-(409)-745-4932
Site
Map Guide
