1-888-317-4594

External Flagpole Hardware Quick Menu:  

Gold Balls   Eagles   Halyard (Rope)   External Stationary Trucks    External Revolving Trucks    Snap hooks    cleats                      Truck Adapters   Flash Collars   Cleat Cover with Halyard Channel American Flags

Internal Flagpole Hardware Quick menu:    

Gold Balls   Eagles   Internal Stationary Trucks    Internal Revolving Trucks    Snap hooks    retainer ring assembly   cable assembly   winch/handle   flash collars   counterweight   flag arrangements American Flags


Internal Flagpole STATIONARY TRUCK


For use on rope style internal halyard flagpoles, a Single Sheave Stationary Truck is modified by adding a small pulley assembly within the truck to allow the halyard to feed from inside the flagpole. The assembly slips over the top of the shaft and is secured by three 1/4"-20NC stainless steel set screws. The minimum inside diameter of the top of the shaft should be 2 3/16". Top of the assembly is tapped 1/2''-13NC to accept a finial. Maximum recommended halyard diameter is 5/16".

PART# SHAFT TOP DIAMETER PRICE
TRK9901 3"

$45.00

TRK9911 3 1/2"

$64.00

 

REVOLVING TRUCK- SMALL


Proportioned for use on flagpoles up to 35' with a top diameter of up to 3 1/2''. Of heavy cast construction, this truck is available in two styles in order to be used in different applications. The standard unit has integrally cast upper and lower bearing races with 25 stainless steel ball bearings. A heavy duty version uses upper and lower stainless steel, sealed lubricant bearing assemblies for longer life and greater ease of rotation. Both models are available for use with cable or can be used in halyard applications with the addition of a hard rubber grommet at the cable exit hole. Assembly is 5 3/4'' in height and 5 3/4'' in diameter. The cast aluminum spindle is threaded 1 1/4'' NPT and the top of the truck is threaded 1/2''-13NC to accept a finial. For Stainless Steel Spindle options, refer to Truck Options & Accessories.

PART# DESCRIPTION PRICE
TRK9670 Standard Unit (Cable only)

$150.00

TRK9680 Standard Unit with Halyard Insert

$150.00

 

REVOLVING TRUCK
LARGE AND EXTRA LARGE

The Large and Extra Large internal halyard units are of heavy cast aluminum construction with a bronze bushing at the cable exit point. These trucks incorporate upper and lower stainless steel, sealed lubricant bearing assemblies. The Large Truck has a base diameter of 8'' and the Extra Large Truck has a base diameter of 10''. Tops are tapped 1/2''-13NC for the attachment of a finial. The standard cast aluminum spindle on each unit is threaded 1 1/4'' NPT. For Stainless Steel Spindle options in 1 1/4'' NPT and 1 1/2'' NPT spindle thread sizes, refer to Truck Options & Accessories.

PART# DESCRIPTION MAX. SHAFT TOP DIA. PRICE
TRK9800 LARGE 4 1/2"

$330.00

TRK9900 EXTRA LARGE 7 1/2"

$515.00

Email Us!

1-888-317-4594  Fax: 1-(409)-745-4932

 

Site Map Guide

Residential and Commercial Aluminum Flagpoles Residential and Commercial Fiberglass Flagpoles Outdoor Flagpole Accessories Indoor Flag Accessories
Patriotic Display Flag Cases Outdoor House Display Flag and Pole kits Feather Arte Flags Outdoor American Flags
Indoor American Flags and Complete Flag Sets U.S. Interment Flags American Handheld Flags Commercial Vertical Aluminum Flagpoles
Commercial Outrigger Aluminum Flagpoles Banner Poles and Street Brackets Flagpole Lighting Kits American Flag Etiquette
Solid Color Flags Military Flags Historical Flags Message and Attention Flags
Outdoor Religious Flags Pleated Star Fans and Pulldowns State Flags Custom Flags
NFL Football Flags College Football Flags Major League Baseball Flags Patriotic Bunting
Poly Pennants World Flags Marine Products NASCAR flags

www.americanflagstore.com